Hand Tools

Hand Tools

Hand Tools

High Quality HVAC Hand Tools!
The right tools make any just easier, and every industry has its unique entries. Two classes of vital HVAC hand tools can be found right here on this page!

Service Wrenches
Many HVAC service wrenches are square drive ratcheting box wrenches, ranging from ¼” to ⅜” and can be used for a wide range of applications, including:

● Accessing multiposition service valves
● Opening residential service valves
● Adjusting a TXV Superheat
● Adjusting acetylene torch tanks
● Adjusting other square valve stems (particularly refrigerant valves)

Specialized tools like these are ideal for the above applications: remember, adjustable wrenches should never be used to adjust service valves or to modulate a TXV Superheat. Only an appropriately sized service wrench should be used for the job.

The right tools are safer to use and prevent damage to vales!

Copper and Tubing Cutters
HVAC technicians should carry at least two copper or tubing cutters: one for smaller diameter pipes and tubes and another for those with larger diameters.

These tools may seem overspecialized, but they enable quick, precise cuts to be made to pipes and tubing without damaging them. These tools also cut through pipes and tubes without creating rough edges or burrs that could cause fitment or system issues.

Contact Us
HVAC technicians are also encouraged to carry along additional tools including but not limited to a set of combination wrenches, a utility knife, an inspection mirror, hex keys, an Allen wrench, a tape measure, and any necessary power tools, such as a cordless drill.

Looking for a tool you don’t see listed here? Have questions about the quality or operation of our HVAC tools? Contact us at 855-473-6484!

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Klein Tools 10'' Pump Pliers Klein Tools 10'' Pump Pliers

    Klein Tools 10'' Pump Pliers

    Klein Tools

    $31.95
    Product Features: Quick-Adjust Rivet allows one-handed fast, easy adjustment of plier jaws 1 3/4'' (44 mm) maximum parallel jaw opening for a range of applications Smoothly adjusts between six machined tongue and groove jaw positions Secure tongue...
    $31.95
    Qty in Cart: 0
    Quantity:
    Price:
    $31.95
    Subtotal:
  • Klein Tools Magnetic Nut Driver Set, 6" Shafts, 2 Piece Klein Tools Magnetic Nut Driver Set, 6" Shafts, 2 Piece

    Klein Tools Magnetic Nut Driver Set, 6" Shafts, 2 Piece

    Klein Tools

    $27.95
    This 2-Piece Magnetic Nut Driver set from Klein Tools features two of the most frequently used nut driver sizes. They feature full 6'' (152 mm) hollow shafts that fit easily over extra-long bolts and studs. The handle end is also color coded to easily...
    $27.95
    Qty in Cart: 0
    Quantity:
    Price:
    $27.95
    Subtotal:
  • Klein Tools Stubby Nut Driver Set 1 1/2" Shafts Magnetic - 2 Piece Klein Tools Stubby Nut Driver Set 1 1/2" Shafts Magnetic - 2 Piece

    Klein Tools Stubby Nut Driver Set 1 1/2" Shafts Magnetic - 2 Piece

    Klein Tools

    $24.95
    Stubby nut drivers allow for work in close quarters. Exclusive hollow shaft design with Rare Earth magnetic tip features unobstructed pass-through, even on long bolts. Includes two nut drivers (Cat. No. 610-1/4M and 610-5/16M). Handles are color...
    $24.95
    Qty in Cart: 0
    Quantity:
    Price:
    $24.95
    Subtotal:
  • Klein Tools Klein Aviation Snips With Wire Cutter Straight Cutting Klein Tools Klein Aviation Snips With Wire Cutter Straight Cutting

    Klein Tools Klein Aviation Snips With Wire Cutter Straight Cutting

    Klein Tools

    $22.95
    Klein Tools introduces Aviation Snips with an integrated wire cutter on the outside of the blades. No more dings to the snip blades when cutting duct wire or ceiling extension wire. Save time and tools with the convenience of just one tool that cuts...
    $22.95
    Qty in Cart: 0
    Quantity:
    Price:
    $22.95
    Subtotal:
  • Klein Tools 11-in-1 Screwdriver w/ Schrader Core Bit Klein Tools 11-in-1 Screwdriver w/ Schrader Core Bit

    Klein Tools 11-in-1 Screwdriver w/ Schrader Core Bit

    Klein Tools

    $23.95
    IDEAL For HVAC!!! Versatile 11-in-1 tool for the professional.Includes unique style bit for installation/removal of common TR-4 Schrader® valves and aggressive thread extractor tip for backing out broken cores. Great for HVAC and other industrial...
    $23.95
    Qty in Cart: 0
    Quantity:
    Price:
    $23.95
    Subtotal:
  • Klein Tools Wire Stripper/Cutter Klein Tools Wire Stripper/Cutter

    Klein Tools Wire Stripper/Cutter

    Klein Tools

    $25.95
    This Klein Tools Wire Stripper/Cutter is designed to cut stranded wire. The precision-ground stripping holes cleanly cut wire and aid in easy removal of insulation. A narrow nose helps this tool fit easily into tight places
    $25.95
    Qty in Cart: 0
    Quantity:
    Price:
    $25.95
    Subtotal:
  • MrCool Tool 3.5" Bi-Metal Hole Saw w/ Locking Quick Change Arbor (MHS3-5) MrCool Tool 3.5" Bi-Metal Hole Saw w/ Locking Quick Change Arbor

    MrCool Tool 3.5" Bi-Metal Hole Saw w/ Locking Quick Change Arbor

    MrCool

    $25.95
    MrCool 3.5" Bi-Metal Hole Saw w/ Locking Quick Change Arbor Great accessory to have and use while installing your MrCool DIY Minisplit.  Features: Sturdy, steel cutting teeth guarantee precision cuts with every use. Heavy backing plate...
    $25.95
    Qty in Cart: 0
    Quantity:
    Price:
    $25.95
    Subtotal:
  • Total: items /

Adding your products to cart