Name: ICP/ Grandaire Model 2 ton 15 SEER2 Heat Pump Split system
Brand: Grandaire
SKU: PA209690488
Price: 2820 USD
Availability: InStock

Description
Additional Information

Description

This is what you get:

Condenser Model#W4H5S24AKAAA+
Air Handler Model#WBHL244AB
FREE Shipping!

Specifications:ICP/-EcoTemp MODEL

EcoTemp Is made by ICP( International Comfort Products)The same Company that Manufactures Carrier Brand

Outdoor Unit Details W4H5S24AKAAA condenser

Tonnage	2 Ton
Cooling Capacity (btu)	up to 24000 Btu
Heating Capacity (btu)	up to 24000 Btu
SEER / EER	14/11.5-EER
HSPF	8.2
Voltage-HZ / Phase	208/230 60 1 Phase
Max Breaker Size	25 Amps
Min/Max Volts	197/253
Refrigerant Type	R410 A
Suction Line Size	5/8"
Liquid Line Size	3/8"
Unit Dimensions	25.75"W x 25.75"D x 35.187H
Sound Level	74 DB
Weight	144 Lbs

ICP/Ecotemp Model Air Handler

Multi-Position Air Handler is suitable for use with r R-410A

Indoor Unit (Multi Position - Multi Speed) MODEL WBHL244AB

Tonnage	2 Ton
Cooling Capacity (btu)	24,000 BTU
Electric Heat Capacity	5,8,10,15,20kw kW
Voltage - HZ / Phase	208/230 / 1 Phase
Min/Max Volts	197/253
Max Breaker Size	15 amps
CFM High/Low 0.3	892 high / 552 low
Unit Dimensions	17.625" W x 22.062" D x 49.625" H
Supply Plenum Dimensions	15.75” W x 11.” D
Return Plenum Dimensions	15.5” W x 19.8” D
Suction Line Size	5/8"
Liquid Line Size	3/8"
Blower Motor HP	1/3 ECM
Blower Motor Speed	Multi Position -5 Speed ECM
Refrigerant Type	R410A
Shipping Weight	122 Lbs

FEATURES:CONDENSER

REFRIGERATION CIRCUIT Scroll compressors on all models
Suction line accumulator factory installed
Integrated solid state control with Time−Temperature Defrost
High and Low pressure switches
Copper tube / aluminum fin coil
Easy Access service valves on all models
External high and low refrigerant service ports
Only two screws to access control panel
Factory charged with R−410A refrigerant
Painted cabinet finish over galvanized steel
Coated inlet grille with 3/8” (10mm) grille spacing for extra protection (hail guard)
AHRI Certified, ETL Listed

Features:AIR HANDLER

Factory installed TXV metering device
Sweat connections
Aluminum Tube, Aluminum Fin Evaporator
Primary and secondary drain fittings
Multiple electrical entry locations
Time delay relay (TDR) Field installed Heat Strips from 5 kW − 20 kW
Tested & Certified to achieve a 2% or less leak rate at 1.0 inch water column
1 inch thick insulation with R value of 4.2
Bult in 1"Filter Rack-(filter sold separately)
ECM 5−speed motor
Multiposition installation- upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
Low voltage circuit protective fuse (3amp) inline on wire harness