Goodman

Goodman 2.0 Ton 17.2 SEER2 Two-Stage Variable Speed Heat Pump Split System (GSZC702410+AMVT30BP1400)

Write a Review
SKU:
PA211641717
MPN:
GSZC702410+AMVT30BP1400
Weight:
375.00 LBS
Shipping:
Free Shipping
  • Goodman 2.0 Ton 17.2 SEER2 Two-Stage Variable Speed Heat Pump Split System
  • Goodman 2.0 Ton 17.2 SEER2 Two-Stage Variable Speed Heat Pump Split System Condser
  • Goodman 2.0 Ton 17.2 SEER2 Two-Stage Variable Speed Heat Pump Split System (GSZC702410+AMVT30BP1400)
MSRP: $5,320.00
$4,929.00
— You save $391.00

Description

goodman-logo.png

 

Goodman 2.0 Ton 17.2 SEER2 Two-Stage Variable Speed Heat Pump Split System

This is what you get:

Goodman 2 Ton Two-Stage Heat Pump Condenser GSZC702410 (NEWEST MODEL)

Goodman 2.5 Ton Variable Speed Multi-Positional Air Handler AMVT30BP1400 (NEWEST MODEL)

GSZC7 Product Features:

• Two-Stage Copeland® UltraTech scroll compressor

• High-density foam compressor sound blanket

• Integrated communicating ComfortBridge™ technology

• Commissioning and diagnostics via indoor board Bluetooth with the CoolCloud™ phone and tablet application

• ComfortAlert™ built in diagnostics

• Copper tube/enhanced aluminum fin coil- 5mm on 2.0-3.0T

• Efficient, two-speed ECM condenser fan motor

• Simple low-voltage wiring to outdoor unit in communicating mode

• Diagnostic indicator lights and storage of six fault codes

• Color-coded terminal strip for non-communicating set-up

• High- and low-pressure switches

• Time-delay technology with short-cycle protection to ensure quiet, reliable defrost

• Factory-installed bi-flow liquid-line filter drier

• Factory-installed suction-line accumulator

• Factory-installed compressor crankcase heater

• Factory-installed high-capacity muffler

• Factory-installed coil and ambient temperature sensors

• AHRI Certified; ETL Listed Cabinet Features

• Grille-style sound control top design

• Custom Nickel Gray powder-paint finish

• 500-hour salt-spray tested

• Wire fan discharge grille

• Steel louver coil guard

• Single panel access to controls with space provided for field-installed accessories

• Sweat connection service valves with easy access to gauge ports

• When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)

GSZC702410 Condenser Specifications  
Cooling Capacity (BTU/h) 24,000
Heating Capacity (BTU/h) 24,000
Sound Level 71
Compressor Type/Stage Scroll/Two
Suction Line Connection Size 3/4"
Liquid Line Connection Size 3/8"
Voltage-Phase-Hz 208/230-1-60
Max. Breaker Size 25 Amps
Min./Max. Volts 197/253
Electrical Conduit Size 1/2" or 3/4"
Unit Dimensions 35.5"W x 35.5"D x 39.5"H
Equipment Weight 219lbs.

AMVT Product Features: 

• Internal factory-installed thermal expansion valves for cooling and heat pump applications

• Variable-speed ECM blower motor

• Integrated communicating ComfortBridge™ Technology

• Commissioning and diagnostics via on board Bluetooth with the CoolCloud™ phone and tablet application

• Auto configuration of the airflow and tonnage in communicating mode

• Provides constant CFM over a wide range of static pressure conditions independent of duct system

• CFM indicator

• Fault recall of six most recent faults

• Provides adjustable low CFM for efficient fan-only operation

• Improved humidity and comfort control

• Built-in compatibility with multi-stage heat pump and cooling applications

• All-aluminum evaporator coil

• AHRI certified; ETL listed

• Rigid SmartFrame™ cabinet

• Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in accordance with ASHRAE standard 193

• Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in accordance with ASHRAE standard 193

• Horizontal or vertical configuration capabilities

• 21" depth for easier attic access

• DecaBDE-free thermoplastic drain pan with secondary drain connections

• Screw-less sides and back helps to reduce condensation when installed in humid locations

• Foil-faced insulation covers the internal casing to reduce cabinet condensation

• Galvanized, leather grain-embossed finish

• Glue-less cabinet insulation retention

• Tool-less filter access 

AMVT30BP1400 Air Handler Specifications  
Cooling Capacity (BTU/h) 30,000
Suction Line Connection Size 3/4"
Liquid Line Connection Size 3/8"
Voltage 208/240
Max. Breaker Size 15 Amps
Min./Max. Volts 197/253
Blower Motor HP 1/2
Blower Motor Speed Variable Speed
Unit Dimensions 17.5"W x 21"D x 53.4375"H
Supply Plenum Dimensions 16.3125"W x 11.25"D
Return Plenum Dimensions 12.5"W x 19.5"D
Equipment Weight 134lbs.
View AllClose